Cisco Catalyst 6509-NEB-A Switch

The 9-slot, vertical-chassis Cisco Catalyst 6509-NEB-A Switch has front-to-back airflow and is ideally suited for service-provider environments or for those enterprise customer environments in which front-to-back airflow is preferred. The Cisco Catalyst 6509-NEB-A supports Cisco Catalyst 6500 Series end-to-end operational consistency benefits.

Important Features
Supports all Cisco Catalyst 6500 Series modules, including:

Supervisor engines
Fast Ethernet modules (with IEEE 802.3af Power over Ethernet [PoE])
Gigabit Ethernet modules (with IEEE 802.3af PoE)
10 Gigabit Ethernet modules
Flex WAN modules
Shared Port Adaptors/SPA Interface Processors
Multi-Gigabit services modules (content services, firewall, intrusion detection, IP Security [IPSec], VPN, network analysis, and Secure Sockets Layer [SSL] acceleration)

The Cisco Catalyst 6509-NEB-A supports both Cisco Catalyst OS and Cisco IOS Software. It also supports up to a 6000W power supply, thus providing the ability to support large numbers of IEEE 802.3af PoE devices.

The Cisco Catalyst 6509-NEB-A provides maximum uptime with redundancy and rapid (1 to 3 seconds) stateful failover across supervisor engines. It supports modular Cisco IOS Software to minimize unplanned downtime through self-healing processes and simplifies software changes through subsystem in-service software upgrades.

Overview
Benefits
Features
Comparison
Data Sheets

Cisco ASA 5500 Series IPS Solution

Obtain market-leading intrusion prevention with firewall, VPN, and optional content security
Protect small business to large enterprise networks at the Internet edge, campus, and data center
Reduce operational and deployment costs, and achieve up to 10 Gb inspection performance
Get integrated security in a desktop or 1-2 rack-unit (RU) form factor

Cisco IPS 4200 Series Sensors

Get the market-leading standalone intrusion prevention appliance
Protect midsize business and enterprise networks at the Internet edge, campus, or data center
Maximize your intrusion prevention investment with up to 4 Gb of inspection capabilities
Install a purpose-built 1-4 RU form factor

Cisco Catalyst 6500 Series Intrusion Detection System (IDSM-2) Module

Software-based intrusion prevention for Cisco Integrated Services Routers
Router-based threat control at the branch, small business, or home office to stop attacks at the point of entry
Reduced operational and deployment costs; no additional hardware required

Cisco IOS Intrusion Prevention System (IPS)

Software-based, inline intrusion prevention for Cisco Integrated Services Routers
Branch-intrusion prevention capabilities integrated into the Cisco IOS platform
Reduced operational and deployment costs; no additional hardware required

Cisco Integrated Services Routers Intrusion Prevention System Module

Intrusion prevention hardware acceleration modules for Cisco Integrated Services Routers (ISRs)
Ideal for ISR branch installations that require dedicated IPS
Provide complete intrusion prevention with dedicated hardware to offload deep packet inspection from the router

Efficiently scale, virtualize, secure, and manage your network remotely with Cisco Catalyst 6500 Series Switches. Offering a high-performance, feature-rich platform suitable for deployment in campus, data center, WAN, and Metro Ethernet networks, the Cisco Catalyst 6500 Series provides a strong foundation for Borderless Networks, so you can connect anyone, anywhere, at any time.

Scale Performance and Network Services

2 terabits per second (Tbps) fabric delivers 80 Gbps switching capacity per slot and scales to 4 Tbps system capacity with Cisco Catalyst Virtual Switching System (VSS)
40G-capable system supports up to 360 10G ports and 1068 1G ports per VSS system
Supervisor Engine 2T supports up to 720 mpps of IPv4 and 390 mpps of IPv6
Provides large table sizes for scalable deployment with protected control plane.

Virtual Switching System

Activates all available bandwidth across redundant Catalyst 6500 systems and eliminates assymmetric routing
Supports interchassis stateful failover and provides deterministic subsecond recovery
Provides single point of management
Eliminates need for First-Hop Resiliency Protocol (FHRP), supports simplified loop-free topologies

Network Virtualization

Offers infrastructure consolidation by providing segmentation, path isolation, privacy, limited fate sharing, membership definition, and address space separation technologies
Delivers end-to-end network virtualization using IP/MPLS technologies.

Security

Identifies (802.1x suite) , tags (SGT), encrypts (MacSec), and enforces (Security Group Access Control List) with Cisco TrustSec
Supports network device admission control (NDAC) and endpoint admission control (EAC)
Provides investment protection with ingress/egress TrustSec Reflector

Integrates Services and Operational Efficiency

Helps unify, simplify, and economize your network with next-generation integrated services modules
Facilitates multiple generations of components on one chassis through a modular design
Monitors switches across the network with Switched Port Analyzer (SPAN)/Remote Switched Port Analyzer (RSPAN) and virtually connects an analyzer to almost any port on the network with Encapsulated Remote SPAN (ERSPAN)
Provides application visibility through flexible, egress, sampled Netflow, and CPU Preserving Netflow Export
Offers image recovery and console logging through the Connectivity Management Processor (CMP)
Delivers onboard packet capture with Mini Port Analyzer

Key Features and Benefits

Security threats have increased in complexity—multigigabit environments and efficient network intrusion security solutions are critical to maintaining a high level of protection. Vigilant protection ensures business continuity and minimizes the effect of costly intrusions. Cisco integrated network security solutions enable organizations to protect their connected business assets and increase the efficiency of intrusion prevention systems. The Cisco IDSM-2 is part of the Cisco Systems® family of intrusion detection and prevention (IDS/IPS) solutions. It works in concert with other Cisco IDS/IPS components to efficiently protect your data infrastructure. The Cisco IDSM-2 is a services module for the widely deployed Cisco Catalyst chassis. With an installed base in the hundreds of thousands, the Cisco Catalyst chassis is a logical platform for additional services such as firewall, VPN, and IDS/IPS services. This second-generation services module provides unique benefits to customers seeking IDS/IPS attack protection.

Cisco ASA 5500 Series IPS Solution

Cisco IPS 4200 Series Sensors

Cisco Catalyst 6500 Series Intrusion Detection System (IDSM-2) Module

Cisco IOS Intrusion Prevention System (IPS)

Cisco Integrated Services Routers Intrusion Prevention System Module

Key Features and Benefits

Supervisor Engines

10G Line Cards

1G Line Cards

Data Sheets

Chassis and Power Supply

Supervisor Engine

Ethernet Modules

Services Modules

Transceiver Modules

WAN

End of Sale Product

White Papers

Architecture

Converged Services

General

Green

High Availability

Metro Ethernet

Operational Manageability

Performance Reports

Security

Virtualization

Case Studies

Education

Finance

Government

Healthcare

Internet/Media

Manufacturing

Retail

Technology/Telecom

Transportation/Logistics

Utilities

Brochures

Free Consultation

Unbeatable Prices

Pro Services

24x7 Tech Support